Dealing with a Unexpected Water Heater Shutdown: Essential Steps
Dealing with a Unexpected Water Heater Shutdown: Essential Steps
Blog Article
How do you really feel about No Hot Water — Water Heater Repair?
Several contemporary houses take advantage of an electric hot water heater for their heating system, due to its benefit and also simplicity of use. However, just like any other electric home appliances, issues may occur with its use, unexpectedly. It can be truly irritating to wake up to a chilly shower as opposed to a warm one or having your bathroom with water that isn't hot enough and even also hot. Whatever the case might be, hot water heater problems can be fairly aggravating. The good news is, we've made a checklist of feasible options to your water heater concerns. There are a variety of aspects that can trigger many of these issues, it could be a problem with the power supply, the electrical burner, or the thermostat. Before doing anything, ensure you turn off the main power supply for safety. Whatever the problem is, getting it dealt with need to not present excessive of a concern if you adhere to these steps:
Call An Expert:
If after replacing all damaged parts and resetting your temperature, the water heater still isn't functioning, you might require to call a specialist plumber for a specialist viewpoint. The trouble with your heater could be that the hot and cold taps have been switched or it might be undersized for the amount of warm water needed in your home. Whatever the case might be, a specialist plumber would certainly help resolve the trouble.
Check Your Power Supply:
As basic as this may seem, it is very essential. Without appropriate power, your water heater will certainly not operate. So the first thing to do when your water all of a sudden retires is to validate that it isn't a power issue. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the issue, simply transform it off and on once more. Change any kind of busted or worn-out fuse. Examine the appliance with power after these changes to see if it's currently working.
Inspect Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't warm sufficient, you might require to inspect the temperature level setups on your upper thermostat. Make certain the breaker is switched off before doing anything. Open up the accessibility panel as well as press the red switch for temperature reset above the thermostat. This ought to help heat up the water. Turn the circuit breaker back on and examine if the issue has actually been solved.
Check the Burner in the Water Heater:
If it's not a power problem, after that try taking a look at your heating element if it is still working. Examine each of your burner to make sure the problem isn't with any one of them. If any one of them is damaged, change that component and afterwards examine whether the warm water is back on.
Final thought
Water heater issues are not always significant. A number of them result from minor concerns like a blown fuse or worn-out burner. Changing the faulty parts should do the trick. Nevertheless, if you are still incapable to address the trouble, give a call to your nearest plumber to come to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I was shown that article about No Hot Water — Water Heater Repair through a good friend on our other web blog. Enjoyed our post? Please share it. Help someone else check it out. Thank you for taking the time to read it.
Make An Appointment Report this page